Author: AlainsProjects

The Schematic   1 x Arduino pro micro 8Mhz 3.3V 1 x Gps Module with Serial interface 2 x Resistor 100R 1 x Resistor 1,2K 1 x Led blue 1 x Led red 1x BC337 or equivalent 1 x 3-5V passive piezo The Display And GPS Part The Controller Part The Software It's still beta, … Continue reading GPS Radar Reminder (GPSRR)

Hi, SuperJemp is a luxemburgish super hero, who takes his super power out of cheese (Kachkéis) I found this small figurine in a box and I thought that it needs a special place. An Ikea Glass dome would be his new home, and it should look like a take off. For this I needed a … Continue reading SuperJemp In A Dome

Ok, The Word Clock works, but I'm really not happy how it turned out. So I have to make a better design for 2020

I'm still working on my Plant Timer, but the libraries are taking to much space. So I checked out the Datasheet of the DHT11 Temp-sensor and I wrote my own Code. It works perfect. Download it here on my Github // Global Variables int DHT11_Pin = 14; // DHT11 Data Pin int Humidity = 0; … Continue reading DHT11 On Arduino Without a Library

I've already had build an indoor grow light, but my plants didn't survive. I thought, the lights were bad, but honestly  ,I had no clue how to handle plants. So here comes the second try, on my way to an automatic hydroponic system. The light will be made out of ultra bright white, red, and … Continue reading Indoor Arduino Controlled Grow Light

I write this down, for myself, and to help others not to search for hours too. I bought a few new, ATtiny 85 and Atiny13 at Aliexpress. It was the first time, I used these brand new controllers. So what can go wrong? EVERYTHING 🙂 First, I soldered them to the PCB-breakouts Sot8 to DIP8, … Continue reading Brand New Attiny’s And The Problems

This undress alert is for my thirteen-year-old son suffering from autism Scott still has problems with the toilet, and because of his limited communication, he takes off his clothes when he is in his room. This does not end, every time, very well. We always keep an eye on him, but I thought it would … Continue reading UD-Alert V1.0

I finally found the time to solder all together an to write a small test program for the Digistump micro controller. It's just changing the brightness and a few color combinations, but it works. Now I have to optimize the software for my bases, so I can switch it on and off, change the color … Continue reading RGB module for my LED bases

I corrected a few issues in the design, but created a few new ones :(. Never mind, I took the chance to try a few paint technics with glue, toilet paper and acrylic paint. Not perfect and a little bit too much, but the next one will be better :).